Fuhong

Steel Wire Brushes

Brushes

Our custom designed brushes and standard industrial power brushes are designed and manufactured in the following categories
Wheel brushes provide straight line brushing action, for surface finishing, cleaning and polishing, weld blending, debarring, and removal of paint, rust, scale, or other contamination. Wheel brushes are appropriate for use with various types of hand-held grinders, bench grinders, robotic finishing equipment, or for mounting onto a driven arbor in a production process. Wheel brush sizes range from 3″ to 15″ outer diameter. Brush face widths of Narrow (3/8″ to ½” between face plates) and Wide (1″ between face plates) are available for most material types.
Spiral Brush manufactures a broad line of wheel brushes, ranging from small diameter copper center wheel brushes to large wide face brushes that are capable of being gang-mounted on a common drive shaft. Most wheel brush styles may be filled with crimped wire or a variety of synthetic or natural fibers.
Cup brushes are used for removal of scale, rust, and paint, as well as for deburring and polishing. Different duty levels and fill materials are available to suit a wide variety of tasks in surface preparation, burr removal, and finishing operations.
Twisted Knot Wire Brushes Twisted knot wheels are filled with straight wire that is twisted to various specifications (2/3 twist, cable twist, or stringer bead) to provide progressively higher levels of brushing action control and aggressiveness of cutting action.
End brushes are suitable for industrial cleaning applications where restricted space is an issue.

Type of Wheel Brushes


Hole Wheel Brushes


Short, medium and long trim options are available for most sizes and material types. A full range of arbor holes from ¼” to 2″ or larger are available, depending on the size of the brush.


Hole Wheel Brushes


Short, medium and long trim options are available for most sizes and material types. A full range of arbor holes from ¼” to 2″ or larger are available, depending on the size of the brush.

Stem-Mounted Wheel brushes


Small Diameter brushes (1 ½” to 3″ dia.) are available factory-mounted onto a ¼” wide by 7/8″ long stem in single or double brush face width configurations.

Adapter Style 2″ Arbor Hole Wheel Brushes


Spiral’s


Standard-Line


brushes are supplied with a standard 2″ arbor hole. Adapters are sold separately for arbors less than 2″ in size. Brush diameters from 4 ¼” up to 15″ are standard.


Copper Center Small Diameter Wheel Brushes


Spiral’s


Rivet-Ring


brushes are the best solution for removing scale, burrs, and corrosion in hard to reach areas and internal surfaces. High speed operation is necessary for most effective use.

Stem-Mounted Wheel brushes:


Small Diameter brushes (1 ½” to 3″ dia.) are available factory-mounted onto a ¼” wide by 7/8″ long stem in single or double brush face width configurations.



Minigrinder Wheel Brushes:


A selection of 4″ diameter wheel brushes particularly suited for high speed grinder operation and small or tight places.

Twisted Knot Wheel Brushes:


Ideal for weld cleaning, heavy flash removal, and rough surface preparation. Fabricated of high quality, high fatigue straight tempered wire for heavy and severe cleaning applications.

Cup Brushes

:


Designed for removing light deposits of scale, paint, rust and small burrs.

Minigrinder Cup Brushes

:


Designed for higher speed rotation in a high speed angle grinder. Suitable for deburring, weld cleaning, paint and rust removal, and surface preparation.

Standard Duty Cup Brushes

:


Designed for removing scale, rust, and paint and other surface preparation including deburring and polishing. Larger format allows coverage of large surface areas.

Twisted Knot Wheel Brushes:


Ideal for weld cleaning, heavy flash removal, and rough surface preparation. Fabricated of high quality, high fatigue straight tempered wire for heavy and severe cleaning applications.

Minigrinder Twisted Knot Wheel Brushes:


A selection of 4” diameter wheel brushes particularly suited for high speed grinder operation and small or tight places.

Standard Duty Twisted Knot Cup Brushes:


For use with electric or pneumatic high speed grinders for heavy duty cleaning of large surfaces. Remove weld scale, rust, old paint, and corrosion. Safe free speeds range from 6,000 rpm to 7,000 rpm.

Minigrinder Twisted Knot Cups:


Designed for higher speed rotation in a high speed angle grinder. Suitable for deburring, weld cleaning, paint and rust removal, and surface preparation.

Knot Style End brushes:


Suitable for severe cleaning applications such as removal of heavy scale, corrosion, weld spatter, and rust.

Solid Fill Wire End Brushes:


are available in crimped carbon steel, stainless steel, brass, or bronze wire .

Flared Wire End brush


provides side cleaning action, and will not score blind hole bottoms.

Hollow Center End brushes


are designed to clean around protruding objects. The hole in the center also prevents balling up of the wires in the center of the brush.